Rode VideoMic Directional Video Condenser Microphone with Mount

2% off

Get this for Rs. 12364 by using UPI/Bank transfer as payment mode during checkout.

About this item

Broadcast and studio sound quality.
Rugged reinforced ABS construction.
Two step high-pass filter – flat or 80 Hz.
Integrated shock mount.
9 V battery operation.

Specification

Brand	Rode
Colour	Black
Power Source	Battery Powered
Compatible Devices	Camera, Smartphone, Camera
Number of Batteries	1 Lithium Ion batteries required

Specifications

Acoustic Principle: Line Gradient
Active Electronics: JFET impedance converter
Capsule: 0.50″
Polar Pattern: Supercardioid
Address Type: End
Frequency Range: 40Hz – 20kHz
Output Impedance: 200Ω
Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 20dB-A
Power Options: 9v battery powered
Weight: 176.00gm
Dimensions: 65.00mmH x 102.00mmW x 250.00mmD
Output: minijack / 3.5 mm
Warranty: 1 year with free extension to 10 years following registration

Rode VideoMic

Directional On-Camera Microphone

The RØDE VideoMic is a professional grade 1/2 inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.

The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Its standard sized shoe mount also includes a 3/8 inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.

In addition to the microphone’s native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones’ industry leading 10 year warranty.